Siemens IC60 Manual de usuario descargar pdf (Pagina 72)

Learn, find and delete remote controls and tags

Building Technologies

Fire Safety & Security Products

12 Learn, find and delete remote controls and tags

12.1 Learn a remote control / radio pendant

Only Users 21-100 can be Radio Pendant.

Pendant Learn

P18E 21-100E

A Radio Pendant must be enrolled into the panel before it can be used.

To learn a Radio Pendant you must first have a compatible receiver connected to

the panel keypad bus. With the receiver connected and the panel in program

mode, entering P18E then the pendant number you wish to enroll, e.g. 21E for

pendant 21, the keypad will start to beep to indicate that learn mode has been

started and the LED on the receiver will flash. Now operate the pendant you wish

to learn into User slot 21. Once the transmitted code has been received by the

panel and saved as pendant 21, the keypad will stop beeping and the LED on the

receiver will stop flashing.

When learning a new radio code the panel checks all possible locations (including

radio zones) before saving the new code to ensure that the code has not already

been loaded into another slot. If the code already exists, the keypad will indicate

which slot the code is already installed at. A number from 1-16 indicates a zone

slot and a number from 21-100 indicates a user slot.

12.2 Delete a remote control / radio pendant

Only Users 21-100 can be Radio Pendant.

Pendant Delete

P19E 21-100E

If you wish to delete a single Radio Pendant, pressing P19E then the User number

while in Program Mode will delete the stored code against that User, e.g. P19E

21E will remove the code stored for User 21.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 171 172

Sin comentarios

Siemens IC60 Manual de usuario Pagina 72