Siemens IC60 Manual de usuario descargar pdf (Pagina 52)

LCD keypad

Building Technologies

Fire Safety & Security Products

8.5.5 Changing the keypad area name

When in Local Program Mode, you scroll with the buttons / to the position

Area Name or go directly by pressing P2001E, the display will look like this:

Area 1 <A.Z>

Area A

You may enter any name you wish up to 16 characters in length (using the same

method as described in changing names). If you program in a name for the area,

this name will appear when displaying events in memory display mode.

When you are happy with the changes press

to save.

8.5.6 Changing the output names

When in Local Program Mode, you scroll with the buttons / to the position

Area Name or go directly by pressing P3001E, the display will look like this:

Out 1 <A.Z>

Output 1

You may enter any name for that output you wish up to 16 characters in length

(using the same method as described in changing names). When viewing events in

Memory Mode, the output name will appear to identify what function the output is

controlling. (e.g. Garage door, lights garden etc.)

When you are happy with the changes press

to save.

8.5.7 Changing the area single character identifier

When in Local Program Mode, you scroll with the buttons / to the position

Area Id or go directly by pressing P998E, the display will look like this:

Area ID <A.Z>

ABCDEFGHIJKLMNOP

You may edit the single character Area identifier at this address starting at Area A

(first left-hand position). The keypad allows for up to 16 areas but the actual

number of areas supported on this panel is two. The first character (in this case the

A) is the identifier used to show the status of the first Area when armed. The

second position (in this case the B) is the identifier used to show the status of the

second Area. If you preferred to have the first area shown as Area 1 and not A

then you can change it here using the same method as used previously. With the

cursor underneath the letter A, press the

button four times until the character in

the first slot shows 1.

When you are happy with the changes press

to save.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 171 172

Sin comentarios

Siemens IC60 Manual de usuario Pagina 52