Siemens IC60 Manual de usuario descargar pdf (Pagina 150)

Telecom interface connection

150

Building Technologies

Fire Safety & Security Products

29 Telecom interface connection

All devices connected to a public telephone line have to follow Telecom Standard

rules.

The dialer facility on this controller has been designed to provide optimum flexibility

in the way in which alarm events are reported. This flexibility includes options for

reporting to a central monitoring station using Contact ID, 4+2 and SIA format, a

domestic reporting option using alternating siren tones, a format for reporting

alarms to an alpha numeric pager and a powerful Speech Dialer.

In accordance with the statutory requirements of the Tele-permit standards we

must bring the following points to your attention.

Problems with the telephone line

In the event of any problem with the control panel, the by-pass switch should be

operated for arming. The user is not allowed to do repair of the telephone line by

himself and needs to arrange with the installer of the device to make the necessary

repairs. Should the matter be reported to Telecom company as a wiring fault, and

the fault be proven to be due to the alarm panel, a call out charge will be incurred.

Power up the System before connecting the telephone line

Should the control panel require relocation the Telecom connection must be

disconnected before the power is disconnected. Similarly when reconnecting the

dialer, it is necessary to power up the panel before connecting the dialer to the

Telecom network.

The connection should be made with a connector

Connection to the Telecom network should be made in accordance with local

Standards. This connection is to be readily accessible to allow disconnection in the

event of a fault.

110/230Volt influence- wiring attention

The telephone line must not enter the cabinet through the same cable entry hole as any 110/230V

mains cables. A separate cable entry must be used for 110/230V cabling.

When using one of the knock-outs around the side of the cabinet for supply entry, a

suitable bushing must be used where the supply cables pass through a knock-out.

The transmit level from this device is set at a fixed level and because of this there

may be circumstances where this device does not give its optimum performance,

when telephone wires are installed to close together with a power line. Before

reporting such occurrences as faults, please check the line with a standard Tele-

permitted telephone, and do not report a fault unless the telephone performance is

impaired.

CAUTION

Check local governmental rules for connection to the local Police- Medical or

Fire Emergency Service directly. In some countries it may not be allowed to

connect automatic dialing equipment directly to such services.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 171 172

Comentarios a estos manuales

Sin comentarios

Siemens IC60 Manual de usuario Pagina 150

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens IC60