Siemens IC60 Manual de usuario descargar pdf (Pagina 41)

Voice board IAV6-90

Building Technologies

Fire Safety & Security Products

6.3.4 DTMF code table

The following DTMF codes are used for sending responses and operating

commands.

Command Default Description

P175E 12E 2 Sets the DTMF code for use by the CMS to operate the

OUTPUT (1-4 digits).

P175E 13E 1 Sets the DTMF code for turning the microphone ON/OFF.

P175E 14E # Dialer acknowledge DTMF code

P175E 15E 99 Forces a test call for testing the DTMF response codes

(AREA A/B).

P63E 1-2E Sets the DTMF code for ARM and DISARM.

Tab. 2 List of DTMF codes

6.4 Mute siren

Valid as of version 9.07:

This option must be programmed to mute all acoustic devices automatically during

listen-in with the full duplex two way voice board.

According EN 50131-3 if an alarm occurred during Exit Delay the dialer should

reported only after 30sec.

Only output 1 and the keypad buzzers are automatically muted. If an external siren is connected to

another output this will not work.

6.5 Domestic kiss-off / Auto kiss-off

Domestic Kissoff

183E 6E

Auto Kiss-off for Voice/Domestic reporting: if Voice or Domestic Report Format is

used and this option is turned On, the alarm will be reported and it can be kissed

off by entering the kiss-off code (P175E 14E) at the telephone but if not kissed off

the event is automatically removed from the dialer buffer once the maximum dial

re-tries has been reached for the telephone number. A new event must then be

created before the dialer will dial again.

We recommend using this function if a customer does not want to acknowledge alarm messages

manually.

Please note: the dialler stops after the first alarm message.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 171 172

Sin comentarios

Siemens IC60 Manual de usuario Pagina 41