Siemens IC60 Manual de usuario descargar pdf (Pagina 60)

How to program the alarm system

Building Technologies

Fire Safety & Security Products

9.4.6 Selecting the sub-menu headings

z Having pressed the button at the selected Main-Menu heading the keypad

will now show Sub-Menus for that heading.

z The Main-Menu heading will remain on the top line of the LCD display and the

Sub-Menus will appear on the bottom line.

z Each press of or arrow keys will advance the Sub-Menus displayed on

the bottom line either up or down by one location.

z To access the Data Entry-Menu options from the Sub-Menu press the button.

9.4.7 Selecting the data entry-menu headings

z Having pressed the button at the desired Sub-Menu heading, the keypad will

now be in the Data Entry-Mode.

z At this point you can use the or arrow keys to cycle through the other

Sub-Menu options for this menu to program all of the options for this menu (e.g.

user, zone, output etc.)or;

z You can use the or arrow keys to cycle through all of the menu points. This

allows you to program the entire menu from 1-xxx.

9.4.8 Showing numeric programmable options in clear text

If you are at a location that has 8 programmable options, e.g. P4E where the User

Arm/Disarm options can be set, by pressing and holding the

button then within 2

seconds pressing the

button you can access the sub- text that describes what

each option can do. To exit the sub-text display press

9.4.9 Stepping back through the menus

If you are in a Menu location, e.g. the User Data Entry field, and you wish to step

back one stage to the previous Sub-Menu, you need to press the

button.

Each time the

button is pressed the display will step back to the previous stage

(remembering where you were before) until you get back to the Main-Menu.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 171 172

Sin comentarios

Siemens IC60 Manual de usuario Pagina 60