Siemens SPCK421 Especificaciones descargar pdf (Pagina 222)

Engineer programming via the browser

Configuring communications

222

Siemens AB

A6V10276959

Security Products

18.11.2011

DNS Server

Enter the IP address of the DNS server.

15.12.4 Registering to SPC portal

The SPC Portal provides you with the ability to remotely connect via the internet to

the embedded web server on the SPC controller without needing to know the WAN

IP address of the SPC unit. The SPC portal server is an external server with a fixed

IP address that has the ability to listen or 'scan' for S PC controllers on specified

port numbers. The default port number that the Portal server listens on is 80 and

the default WAN port (the port address of the SPC as seen from the external

network) is 443.

1. Select Settings > Comms. > Portal.

 The following window will be displayed.

2. Configure the fields as described in the table below.

Enabled

Tick this box to enable the Portal Operation.

Portal Port

Enter the Port number that the Portal server is 'listening' on (default: 80).

Portal IP Address

Enter the Fixed IP address of the SPC Portal Service (87.192.253.140 - contact

Siemens for confirmation of this information). The IP address of the Portal server

can also be specified as a DNS name instead of numeric IP format. Note this

requires a DNS server to be configured under Ethernet settings.

WAN IP address

If your ISP has assigned a fixed IP address for your internet connection then

enter it here. If you do not have a fixed IP address then this should be left blank.

WAN Port

Leave this number at the default setting (443) unless instructed to do otherwise

by your network manager.

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 295 296

Sin comentarios

Siemens SPCK421 Especificaciones Pagina 222