Siemens SPCK421 Especificaciones Pagina 198

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 296
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 197
15
Engineer programming via the browser
X-BUS
198
Siemens AB
A6V10276959
Security Products
18.11.2011
Area
Select the area is to be controlled by the function key.
Function
Select the function to be performed by this key in this area..
Area
Select an area if the indicator module is located in a secure area.
Visual Indication
Indicator
There are 8 indicators / LEDs on the right and 8 indicators / LEDs on the left side.
Function
The function that is indicated by this LED.
Function On
Select the colour and the state for every indicator if the selected function is ON.
Function Off
Select the colour and the state for every indicator if the selected function is OFF.
Change function
Press this button to change the function for this indicator. The function can be
enabled or used for a system, area, zone or keyswitch.
Audible Indications
Alarms
Select if the alarms should be audible.
Entry / Exit
Select if entry / exit should be audible.
Key press
Select if keypress should be audible.
Deactivation
Calendar
Select if indicator expander should be limited by calendar.
Mapping gate
Select if indicator module should be limited by a mapping gate.
Keyswitch
Select if indication module should be limited by a keyswitch.
Keypad
Select if indicator module should be limited to a valid PIN entered on a keypad.
(see warning above)
Card reader
Select if indicator module should not be activated until a valid card/fob is
presented to the built-in card reader.
15.10.2.2 Configuring a Keyswitch Expander
1. Select Settings > X-Bus > Expanders.
2. Click one of the keyswitch identifying parameters.
The following dialog is displayed.
Vista de pagina 197
1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 295 296

Comentarios a estos manuales

Sin comentarios