Siemens SINUMERIK 802D sl Especificaciones descargar pdf (Pagina 50)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-50

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

8000 Channel %1 option 'user interrupt programs' not set

Parameters: %1 = channel number

Definitions: The signals of NCK inputs are required in order to activate the interrupt routines and rapid lift from

contour. This function is not included.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Do not use fast interrupt inputs!

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

8010 Option 'activation of more than %1 axes' not set

Parameters: %1 = number of axes

Definitions: More machine axes have been defined through MD 20070 AXCONF_MACHAX_USED than are

allowed in the system.

Reaction: NC not ready.

Mode group not ready, also effective for single axes

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Please inform the authorized personnel/service department. The sum of all axes that have been con-

figured through the channel-specific MD 20070 AXCONF_MACHAX_USED, must not exceed the

maximum number of axes.

Program Con-

tinuation:

Switch control OFF - ON.

8020 Option 'activation of more than %1 channels' not set

Parameters: %1 = Number of channels

Definitions: A 2nd channel has been indicated but the corresponding option does not exist.

Reaction: NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: In the system-specific MD 10010 ASSIGN_CHAN_TO_MODE_GROUP, reduce the number of chan-

nels to 1 or retrofit the option for a 2nd channel.

Program Con-

tinuation:

Switch control OFF - ON.

8021 Option 'activation of more than %1 mode groups' not set

Parameters: %1 = Number of mode groups

Definitions: The option for the number of mode groups is not compatible with the activated mode group.

Reaction: NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Add option for more mode groups. Activate fewer mode groups.

Program Con-

tinuation:

Switch control OFF - ON.

8022 Option 'activation of more than %1KB SRAM' not set

Parameters: %1 = Memory size

Definitions: The option for memory extension does not correspond to the active SRAM.

Reaction: NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Please inform the authorized personnel/service department.

- Buy option

- Activate less SRAM

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 391 392

Siemens SINUMERIK 802D sl Especificaciones Pagina 50

Comentarios a estos manuales

Siemens SINUMERIK 802D sl Especificaciones Pagina 50

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl