Siemens SINUMERIK 802D sl Especificaciones descargar pdf (Pagina 170)

Overview of alarms 06/2007

NCK alarms/ISO alarms

2-170

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Definitions: The maximum number of master values has been exceeded for the stated type of generic coupling.

Reaction: NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Modify part program, reduce number of master values or use a different type of coupling.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16690 Channel %1 block %2 following axis/spindle %3 changing the reference

system %4 is not possible.

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

%4 = Reference system

Definitions: An attempt was made to change the reference system with generic coupling active.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part programm.

End coupling and reactivate with desired reference system.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16691 Channel %1 block %2 following axis/spindle %3 changing the reference

system %4 is not possible.

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

%4 = Reference system

Definitions: An attempt was made to change the reference system with generic coupling active.

Reaction: NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Modify part programm.

End coupling and reactivate with desired reference system.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

16692 Channel %1 block %2 following axis/spindle %3 maximum number of

couplings in the block %4 has been exceeded

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Axis name, spindle number

%4 = Maximum number of couplings

Definitions: The maximum number of generic couplings in the block has been exceeded.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Reduce the number of generic couplings programmed in the block.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 391 392

Siemens SINUMERIK 802D sl Especificaciones Pagina 170

Comentarios a estos manuales

Siemens SINUMERIK 802D sl Especificaciones Pagina 170

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl