Siemens SINUMERIK 802D sl Especificaciones descargar pdf (Pagina 205)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-205

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

17200 Channel %1 block %2 deleting tool data not possible

Parameters: %1 = channel number

%2 = block number, label

Definitions: An attempt has been made to delete from the part program the tool data for a tool currently involved

in a machining operation. Tool data for tools involved in the current machining operation may not be

deleted.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Deselect tool

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17210 Channel %1 block %2 access to variable not possible

Parameters: %1 = channel number

%2 = block number, label

Definitions: The variable cannot be written/read directly from the part program.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17224 Channel %1 block %2 tool T/D= %3 - tool type %4 is not permitted

Parameters: %1 = Channel number

%2 = Block number, label

%3 = Incorrect T no. / D no.

%4 = Incorrect tool type

Definitions: On this system, it is not possible to select tool offsets of the

indicated tool types.

The variety of tool types can both be limited by the machine OEM

and be reduced on individual control models.

Only use tools of the tool types permitted for this system.

Check whether an error has occurred on defining the tool.

Reaction: Correction block is reorganized.

Interpreter stop

Interface signals are set.

Alarm display.

Remedy: Correct the NC program or correct the tool data

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

17270 Channel %1 block %2 call-by-reference: illegal variable

Parameters: %1 = channel number

%2 = block number, label

Definitions: Machine data and system variables must not be transferred as call-by-reference parameters.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Correct the NC program: Assign the value of the machine data or system variable to a program-local

variable and transfer this as parameter.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 391 392

Siemens SINUMERIK 802D sl Especificaciones Pagina 205

Comentarios a estos manuales

Siemens SINUMERIK 802D sl Especificaciones Pagina 205

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl