Siemens SINUMERIK 802D sl Especificaciones descargar pdf (Pagina 307)

Cycle alarms

06/2007 Overview of alarms

2-307

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

61357 Channel %1 Block %2: No resources free

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE106.

Not enough NC memory space available.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Delete the files.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61369 Channel %1 block %2: Position of corner not clearly definable, check

parameter (_SETV[0...7])

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE961.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Define P1 and P2 or P3 and P4 in a way that the intersection of the straights determined by these

points is outside the sections formed by P1 and P2 or P3 and P4.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61501 Channel %1 block %2: Simulation is active

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycles: all grinding cycles

Remedy: Reset simulation

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61502 Channel %1 block %2: No tool offset active

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycles: all grinding cycles

Remedy: A tool number must be programmed

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61503 Channel %1 block %2: tool nose radius compensation left or right

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycles: CYCLE410, CYCLE411, CYCLE412,

CYCLE413, CYCLE414, CYCLE415, CYCLE416, CYCLE420

Remedy: A tool offset value has to be programmed

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61504 Channel %1 block %2: _KNG incorrect for setup

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: setup function

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 302 303 304 305 306 307 308 309 310 311 312 ... 391 392

Siemens SINUMERIK 802D sl Especificaciones Pagina 307

Comentarios a estos manuales

Siemens SINUMERIK 802D sl Especificaciones Pagina 307

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl