Siemens SINUMERIK 802D sl Especificaciones descargar pdf (Pagina 113)

NCK alarms/ISO alarms

06/2007 Overview of alarms

2-113

SINUMERIK 802D sl, Diagnostics Manual, 06/2007Edition

Definitions: When programming G07.1 (cylinder interpolation TRACYL), no cylinder radius has been pro-

grammed. Selection of the cylinder interpolation (TRACYL) with G07.1 C <cylinder radius> deselect

with G07.1 C0. For "C" the name of the rotary axis defined in the TRACYL machine data has to be

programmed.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: G07.1 block, program the cylinder radius under the name of the rotary axis for the cylinder interpola-

tion.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12726 Channel %1 block %2 illegal plane selection with parallel axes

Parameters: %1 = channel number

%2 = block number, label

Definitions: In a block with plane selection (G17 – G19), a basic axis of the coordinate system must not be pro-

grammed together with the parallel axis assigned

to it.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: For plane selection with G17, G18, G19 either program the basic axis of the coordinate system or the

assigned parallel axis.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12728 Channel %1 block %2 distance for double turret not set

Parameters: %1 = channel number

%2 = block number, label

Definitions: The tool clearance for the double turret head in the setting data 42162

EXTERN_DOUBLE_TURRET_DIST is 0.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Enter tool clearance for the double turret head in the setting data 42162

EXTERN_DOUBLE_TURRET_DIST.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12730 Channel %1 block %2 no valid transformation machine data

parameterized

Parameters: %1 = channel number

%2 = block number, label

Definitions: The machine data 24100 TRAFO_TYPE_1, 24110 TRAFO_AXES_IN_1[1],

24210 TRAFO_AXES_IN_2[1] are incorrectly set for G07.1, G12.1.

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Enter valid transformation identifier for TRACYL in MD 24100 TRAFO_TYPE_1 and the rotary axis

number in MD 24110 TRAFO_AXES_IN_1[1] or MD 24210 TRAFO_AXES_IN_2[1].

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

12740 Channel %1 block %2 modal macro call %3 not possible

Parameters: %1 = channel number

%2 = block number, label

%3 = source string

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 391 392

Siemens SINUMERIK 802D sl Especificaciones Pagina 113

Comentarios a estos manuales

Siemens SINUMERIK 802D sl Especificaciones Pagina 113

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl