Siemens SINUMERIK 802D sl Especificaciones descargar pdf (Pagina 298)

Overview of alarms 06/2007

Cycle alarms

2-298

SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition

61257 Channel %1 block %2: incomplete installation of counterspindle

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Start-up of the counterspindle is incomplete.

Alarm triggered by following cycle: F_SUB_SP.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Check display machine data 9803, 9851, 9852, 9853 and 9854 .

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61258 Channel %1 block %2: set parameters for counterspindle chuck in the

spindle image

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The parameters for the counterspindle chuck have not been set in the spindle view.

Alarm triggered by following cycle: F_SUB_SP.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Specify parameters "ZL1", "ZL2" and "ZL3" in mask "Tools work offset" > "Spindles".

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61259 Channel %1 block %2: program contains new machining steps from

ShopMill %4

Parameters: %1 = Channel number

%2 = Block number, label

%4 = ShopMill version

Definitions: The program has been created with a ShopMill version that is higher than the existing one.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Delete the machining step and reprogram machining if required.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61260 Channel %1 block %2: program contains new machining steps from

ShopTurn %4

Parameters: %1 = Channel number

%2 = Block number, label

%4 = ShopTurn version

Definitions: The program has been created with a ShopMill version that is higher than the existing one.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Delete the machining step and reprogram machining if required.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 293 294 295 296 297 298 299 300 301 302 303 ... 391 392

Siemens SINUMERIK 802D sl Especificaciones Pagina 298

Comentarios a estos manuales

Siemens SINUMERIK 802D sl Especificaciones Pagina 298

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl