Siemens OSM Guía de usuario descargar pdf (Pagina 90)

following Reset, and perform the Reset to start running the new (non-BMC) firmware. Then you can

update the other image, which was the Running image but, following the Switch to Use Shadow...

and Reset actions, is now the Shadow image.

Switch to Use Running Firmware Image After Reset

Available for NonStop NS14000 series and NS16000 series servers only, this action sets the

NSBE Image After Next Reset attribute value to Running, indicating that the current Running firmware

image will be used after the next Reset action.

Blade Element Firmware

This object exists in OSM to display the many firmware attributes that exist for Integrity NonStop

NS14000 series and NS16000 series Blade Elements.

For these types of systems, the Blade Element firmware is updated through a guided procedure

launched by the Firmware Update action located under the Blade Complex object. For duplex or

triplex processor complexes, it is recommended that you update the Shadow image for all blade

elements in the complex at the same time, then reset the blade elements one at a time (using the

Reset Blade Element action under the Blade Elements object).

NOTE: For other Integrity NonStop servers, the firmware attributes valid for those systems are

displayed under the Blade Element Physical attributes instead, and the update procedure is launched

from a Firmware Update action located under the Blade Element object (rather than under the

Blade Complex object).

Attributes

Blade Element Firmware

NSBE represents NonStop Blade Element Firmware other than BMC. This

attribute indicates whether the current Shadow or Running firmware image

NSBE Image After Next Reset

will be used following the next Reset action, as specified by using the Switch

to Use Shadow or Running Firmware Image After Reset actions.

This attribute always displays a value of Running, because the Switch to Use

Shadow Firmware Image After Reset action immediately causes the Blade

BMC Image After Next Reset

Element to start running BMC firmware from the Shadow image. The Shadow

image at the time the action is performed immediately becomes the Running

image.

Halted State Services Firmware

The version of the HSS firmware currently running on the processor Blade

Element.

Running Version

The version of the HSS firmware currently designated as the Shadow image

of the Blade Element firmware.

Shadow Version

The name of the file to be used for a HSS firmware update.Default File Name

The version of the firmware to be used for a HSS firmware update.Default File Version

The difference, if any, between the current Running image and default HSS

firmware version. Values

Running Compare State

The difference, if any, between the current Shadow image and default HSS

firmware version. Values

Shadow Compare State

90 System Resources

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 305 306

Comentarios a estos manuales

Sin comentarios

Siemens OSM Guía de usuario Pagina 90

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens OSM