Siemens OSM Guía de usuario descargar pdf (Pagina 149)

Start

Starts the G4SA PIF. The PIF must be in the Stopped state before you perform this action. When

the Start action completes, the PIF is in the Started state.

Stop

Rather than automatically stopping the G4SA PIF (as the Abort action does), this action first warns

you if the PIF is currently in use (and stops it only after you confirm).

G4SA SAC

A ServerNet addressable controller mounted on a G4SA (Gigabit Ethernet 4-port ServerNet adapter)

or the functional equivalent on a VIO G4SA.

Each G4SA SAC contains up to four G4SA PIFs, which correspond to the four Ethernet ports on

each G4SA.

Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > G4SA > G4SA SAC

or, in a VIO enclosure:

System > Fabric Group 100 > Internal ServerNet Fabric > VIO Module > G4SA > G4SA SAC

Example: G4SA SAC $ZZLAN.G4SA1.0

Attributes

G4SA SAC

Displayed in the Attributes tab and Attributes dialog box only if the value is

something other than OK. Values

Service State

Logical

Indicates whether the SAC boot firmware is automatically reloaded if it

terminates abnormally.

Enabled: The boot firmware is automatically reloaded.

Automatic Boot State

Disabled: The boot firmware is not automatically reloaded.

Unknown: Automatic Boot state could not be read.

Indicates whether the SAC will dump information about the reasons the SAC

aborts operations.

Values, as established through the SCF AUTODUMP command, are:

Automatic Dump State

Disabled: Indicates that the SAC will not autodump.

Enabled: Indicates that SAC will autodump.

Extended: Indicates that additional information is dumped. The size of an

extended G4SA dump file is significantly larger. Use this option only at the

direction of HP service provider.

The state of the component as known to the operating system on the server.

Values

Device State

The file name of the operational firmware running on the SAC.Download File Name

The version of the operational firmware running on the SAC.Download File Version

Displays the default naming convention for dump files. The default value

($SYSTEM.SYS00.C061D00) can be altered in SCF. The first dump file name

Dump File Name

ends in 00. Each subsequent dump file automatically receives the next

sequential number.

G4SA SAC 149

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 305 306

Comentarios a estos manuales

Sin comentarios

Siemens OSM Guía de usuario Pagina 149

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens OSM