Siemens SINUMERIK 802D sl Manual del operador descargar pdf (Pagina 262)

Overview of alarms 06/2009

Cycle alarms

2-262

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Definitions: --

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61810 [Channel %1: ] Block %2: ISO G code not possible

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: In the call block an impermissible ISO axis name was programmed.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61811 [Channel %1: ] Block %2: ISO axis name illegal

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: In the call block an impermissible numerical value was programmed.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61812 [Channel %1: ] Block %2: Value(s) in external cycle call wrongly defined

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: In the call block an impermissible numerical value was programmed.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61813 [Channel %1: ] Block %2: GUD value wrongly defined

Definitions: An impermissible numerical value was

entered in the cycles-setting data.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 257 258 259 260 261 262 263 264 265 266 267 ... 339 340

Comentarios a estos manuales

Sin comentarios

Siemens SINUMERIK 802D sl Manual del operador Pagina 262

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl