Siemens SINUMERIK 802D sl Manual del operador descargar pdf (Pagina 259)

Cycle alarms

06/2009 Overview of alarms

2-259

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

61740 [Channel %1: ] Block %2: Blank must be closed contour

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: Check whether blank contour is closed, i.e. starting point = end point.

61741 [Channel %1: ] Block %2: Cancel due to insufficient memory space

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61742 [Channel %1: ] Block %2: Approach collision, correction not possible

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Alarm triggered by following cycle: CYCLE950.

Remedy: --

61766 [Channel %1: ] Block %2: Error in blank program

Parameters: %1 = Channel number

%2 = Block number, label

Definitions:

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61798 [Channel %1: ] Block %2: Acknowledgment error ACTIVATE

Parameters: %1 = Channel number

%2 = Block number, label

Definitions:

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61799 [Channel %1: ] Block %2: Acknowledgment error READYPROG

Parameters: %1 = Channel number

%2 = Block number, label

Definitions:

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: --

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 339 340

Comentarios a estos manuales

Sin comentarios

Siemens SINUMERIK 802D sl Manual del operador Pagina 259

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl