Siemens SINUMERIK 802D sl Manual del operador descargar pdf (Pagina 252)

Overview of alarms 06/2009

Cycle alarms

2-252

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE432

Remedy: Check values in grinding wheel data

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61559 [Channel %1: ] Block %2: Chamfer / radius + shoulder height are less

than the retraction height of the right edge of the grinding wheel

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE432

Remedy: Check values in grinding wheel data

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61560 [Channel %1: ] Block %2: Infeed in Z direction too big per stroke, or

wheel too narrow

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycles: CYCLE427, CYCLE428

Remedy: Reduce infeed path parameter or use other tool

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61561 [Channel %1: ] Block %2: Feed left wheel edge <=0

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE432

Remedy: Check values in grinding wheel data

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61562 [Channel %1: ] Block %2: Feed right wheel edge <=0

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE432

Remedy: Check values in grinding wheel data

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61563 [Channel %1: ] Block %2: Feed on the diameter <=0

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE432

Remedy: Check values in grinding wheel data

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61564 [Channel %1: ] Block %2: Feed insertion <=0

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycles: CYCLE434, CYCLE444

Remedy: Check values in grinding wheel data

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61565 [Channel %1: ] Block %2: Feed dressing <=0

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycles: CYCLE434, CYCLE444

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 339 340

Comentarios a estos manuales

Sin comentarios

Siemens SINUMERIK 802D sl Manual del operador Pagina 252

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl