Siemens SINUMERIK 802D sl Manual del operador descargar pdf (Pagina 24)

Overview of alarms 06/2009

NCK alarms

2-24

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Definitions: In the specified machine data, a number has been specified for the configuration of an M function

which is occupied by the system, and cannot be used for an assignment. (M0 to M5, M17, M30, M40

to M45 and also M98, M99 with applied ISO dialect). The value set by the user has been reset to the

default value by the system.

Reaction: Mode group not ready.

Channel not ready.

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Configure an M function in the specified machine data which is not occupied by the system (M0 to M5,

M17, M30, M40 to M45 and also M98, M99 with applied ISO dialect).

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

4183 [Channel %1: ] M auxiliary function number %2 used several times (%3

and %4)

Parameters: %1 = Channel number

%2 = M auxiliary function number

%3 = MD identifier

%4 = MD identifier

Definitions: In the specified machine data, a number has been used several times for the configuration of an M

function.

Reaction: Mode group not ready.

Channel not ready.

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Check the specified machine data and create a unique assignment of M auxiliary function numbers.

Program Con-

tinuation:

Switch control OFF - ON.

4184 [Channel %1: ] Illegally predefined auxiliary function in %2%3, MD reset

Parameters: %1 = Channel number

%2 = MD identifier

%3 = If required, MD index

Definitions: In the specified machine data, a predefined auxiliary function has been illegally configured.

The value set by the user has been reset to the default value by the system.

Reaction: Mode group not ready.

Channel not ready.

NC Start disable in this channel.

Interface signals are set.

Alarm display.

NC Stop on alarm.

Remedy: Configure a valid value in the specified machine data.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

4185 [Channel %1: ] Illegal auxiliary function configured %2 %3 %4

Parameters: %1 = Channel number

%2 = Type of auxiliary function

%3 = Extension

%4 = Auxiliary function value

Definitions: An auxiliary function has been illegally configured.

Predefined auxiliary functions cannot be reconfigured by user-defined auxiliary functions.

See:

MD22010 $MC_AUXFU_ASSIGN_TYPE[n]

MD22020 $MC_AUXFU_ASSIGN_EXTENSION[n]

MD22030 $MC_AUXFU_ASSIGN_VALUE[n]

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 339 340

Comentarios a estos manuales

Sin comentarios

Siemens SINUMERIK 802D sl Manual del operador Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl