Siemens SINUMERIK 802D sl Manual del operador descargar pdf (Pagina 123)

NCK alarms

06/2009 Overview of alarms

2-123

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

- Definition of LUDs in incorrect subroutine level

- Transferred circle coordinates

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

15810 [Channel %1: ] Block %2 wrong array dimension for

CONTPRON/CONTDCON

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: The number of columns for the array created for CONTPRON/CONTDCON does not conform to the

current programming guide.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Modify part program.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

15900 [Channel %1: ] Block %2 touch probe not allowed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Measure with deletion of distance-to-go

In the part program, an illegal probe has been programmed with the command MEAS (measure with

deletion of distance-to-go). The probe numbers

0 ... no probe

1 ... probe 1

2 ... probe 2

are allowed, whether the probe is actually connected or not.

Example:

N10 MEAS=2 G01 X100 Y200 Z300 F1000

Probe 2 with deletion of distance-to-go

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

Remedy: Include a probe number within the limits given above in the keyword MEAS=... This must correspond

to the hardware connection of the probe.

Program Con-

tinuation:

Clear alarm with NC START or RESET key and continue the program.

15910 [Channel %1: ] Block %2 touch probe not allowed

Parameters: %1 = Channel number

%2 = Block number, label

Definitions: Measure without deletion of distance-to-go

In the part program, an illegal probe has been programmed with the command MEAW (measure with-

out distance-to-go). The probe numbers

0 ... no probe

1 ... probe 1

2 ... probe 2

are allowed, whether the probe is actually connected or not.

Example:

N10 MEAW=2 G01 X100 Y200 Z300 F1000

Probe 2 without deletion of distance-to-go

Reaction: Correction block is reorganized.

Interface signals are set.

Alarm display.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 339 340

Comentarios a estos manuales

Sin comentarios

Siemens SINUMERIK 802D sl Manual del operador Pagina 123

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl