Siemens SINUMERIK 802D sl Manual del operador descargar pdf (Pagina 238)

Overview of alarms 06/2009

Cycle alarms

2-238

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

61354 [Channel %1: ] Block %2: File for logfile not found

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE106.

No name specified for the log file.

Remedy: Check parameter _PROTNAME[1].

61355 [Channel %1: ] Block %2: Incorrect file type for logfile

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE106.

The file extension for the log file is incorrect.

Remedy: Check parameter _PROTNAME[1].

61356 [Channel %1: ] Block %2: File for logfile is being used

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE106.

The log file is already used by an NC program.

Remedy: Check parameter _PROTNAME[1].

61357 [Channel %1: ] Block %2: No resources free

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE106.

Not enough NC memory space available.

Reaction: Interpreter stop

NC Start disable in this channel.

Interface signals are set.

Alarm display.

Remedy: Delete the files.

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61358 [Channel %1: ] Block %2: Error during recording

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE106.

Internal error

Remedy: Call the hotline!

61359 [Channel %1: ] Block %2: - continue with RESET

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE106.

Internal error

Remedy: Call the hotline!

61360 [Channel %1: ] Block %2: Log job undefined - continue with RESET

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: Alarm triggered by following cycle: CYCLE106.

Cycle CYCLE106 was called by an incorrect parameter.

Remedy: Check cycle call for CYCLE106, specifically the call parameter.

61361 [Channel %1: ] Block %2: Variable cannot be recorded

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm is triggerd by the following cycles: CYCLE105.

The value specified in _PROTVAL[] cannot be logged.

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 339 340

Comentarios a estos manuales

Sin comentarios

Siemens SINUMERIK 802D sl Manual del operador Pagina 238

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl