Siemens SINUMERIK 802D sl Manual del operador descargar pdf (Pagina 247)

Cycle alarms

06/2009 Overview of alarms

2-247

SINUMERIK 802D sl, Diagnostics Manual, 06/2009

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61511 [Channel %1: ] Block %2: Incorrect shoulder position or tool edge D1/D2

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: setup function

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61512 [Channel %1: ] Block %2: Incorrect longitudinal position

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: setup function

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61513 [Channel %1: ] Block %2: Dresser left and inclined grinding wheel

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: setup function

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61514 [Channel %1: ] Block %2: Grinding wheel type missing

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: setup function

Remedy:

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61515 [Channel %1: ] Block %2: Retraction path <= dressing amount

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE416

Remedy: Change retraction path

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61517 [Channel %1: ] Block %2: Angle of inclined grinding wheel missing

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE416

Remedy: Enter angle under $TC_TPG8

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

61518 [Channel %1: ] Block %2: Shoulder height of grinding wheel must be >

grinding wheel radius

Parameters: %1 = Channel number

%2 = Block number, label channel number

Definitions: The alarm can be triggered by the following grinding cycle: CYCLE432

Remedy: Change shoulder height or grinding wheel radius

Program Con-

tinuation:

Clear alarm with the RESET key. Restart part program

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 339 340

Comentarios a estos manuales

Sin comentarios

Siemens SINUMERIK 802D sl Manual del operador Pagina 247

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Siemens SINUMERIK 802D sl