Siemens NAN 67 Series Manual de servicio descargar pdf (Pagina 117)

8-19

Ladder Logic (LAD) for S7-300 and S7-400

C79000-G7076-C504-02

8.18 Positive RLO Edge Detection

The operation Positive RLO Edge Detection recognizes a change in the

entered address from 0 to 1 (rising edge) and displays this as RLO = 1 after

the operation. The current signal state in the RLO is compared with the

signal state of the address, the edge memory bit. If the signal state of the

address is 0 and the RLO was 1 before the operation, the RLO will be 1

(impulse) after the operation, and 0 in all other cases. The RLO prior to the

operation is stored in the address.

Certain restrictions apply to the placement of the Positive RLO Edge

Detection element (see Section 6.1).

Table 8-17 Positive RLO Edge Detection Element and Parameter

LAD Element Parameter Data Type Memory Area Description

<address1> BOOL Q, M, D

The address indicates the edge memory

bit that stores the previous RLO.

Status Word Bits

BR CC 1 CC 0 OV OS OR STA RLO FC

Write – – – – – x x x 1

I 0.0 CAS1

Edge memory bit M 0.0 saves the old

state of the RLO from the complete bit

logic combination. If there is a signal

change at the RLO from 0 to 1, the

program jumps to label CAS1.

I 0.2

I 0.1

P JMP

M 0.0

Figure 8-17 Positive RLO Edge Detection

Description

Bit Logic Instructions

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 317 318

Sin comentarios

Siemens NAN 67 Series Manual de servicio Pagina 117