Siemens IP-Module Especificaciones Pagina 251
- Pagina / 417
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
IP 240 Positioning
10.23.2 The Configuring Function Block
FB 167 (STRU.POS) Configures and initializes the IP 240 for ”positioning” mode
Functional description
The configuring FB first checks the input parameters and the length of the data block to be used
for data interchange with the IP. It then transfers the general module data (machine-readable
product designation of the module, FW and HW versions) from the IP to the data block, verifying
its own compatibility with the firmware version as it does so. It then enters any errors detected
during the startup test ( Section 6.4) in the data block. Finally, the configuring data (parameters
for FB 167) and the following data areas from the DB to the IP:
• Zero offset
• Final value (pos.) for the rotary axis
• Distance values for the switching and signalling ranges
• Position numbers and position values for positions 1 to 254.
Following error-free configuring of the channel, a mode identifier is entered in data byte DL 23.
If the channel is reconfigured, active outputs are reset and any interrupts pending for the channel
cancelled.
Hardware, parameter assignment and data errors are flagged in the PAFE byte and described in
detail in data words DW 8 to DW 10 and DW 13. Should an error occur, the addressed channel is
not configured.
Invoking the function block
The configuring FB is invoked in the restart organization blocks.
FB 167
: JU FB 167
NAME : STRU.POS
BGAD : KF
KANR : KF
DBNR : KF / KY
AFL : KF
IMP : KF
BCD : KY
PRA1 : KM
PRA2 : KM
RUND : KF
LOSE : KF
DAV : KF
PAFE : QB
BER : KF
ABIT : KY
STL
QB
BGAD
KANR
DBNR
AFL
IMP
BCD
PRA1
PRA2
RUND
LOSE
DAV
BER
ABIT PAFE
LAD/CSF
Note
The data block number (DBNR) must be specified in KF format in the S5-115U and
S5-150U and in KY format in the S5-135U and S5-155U.
The S5-115U requires no address space specification (BER), the S5-115U and
S5-135U no ABIT parameter.
EWA 4NEB 811 6120-02a
10-85
- SIMATIC S5 1
- Counter/Positioning/ 1
- Position Decoder Module 1
- Copyright © Siemens AG 1990 2
- First Printing, March 1991 2
- EWA 4NEB 811 6120-02c 3
- IP 240 Preface 5
- Introduction 6
- Introduction IP 240 7
- Conventions 10
- EWA 4NEB 811 6120-02a 11
- 1 System Overview 13
- System Overview 14
- 2.2 Technical Specifications 18
- 2.2.2 Counting 19
- 2.2.3 Inputs/Outputs 20
- 2.3 LEDs 23
- 2.4 Order Numbers 24
- 3 Addressing 27
- Addressing IP 240 28
- IP 240 Addressing 29
- 4 Hardware Installation 32
- 4.2 Wiring 35
- 4.2.1 Wiring Method 35
- 4.3 Installation Examples 38
- 4.3.1 Inputs 38
- 4.3.2 Outputs 43
- ((1887/3)) 43
- 6.1.2 Digital Outputs 56
- 6.1.3 Interrupt generation 56
- 6.1.4 LEDs 56
- 6.2 Programming 57
- 6.2.2 Control Function Blocks 58
- 6.2.3 Data Blocks 58
- 6.3 Restart Characteristics 59
- 6.3.1 Power On 59
- 6.3.2 CPU STOP 59
- 6.4 Fault and Error Flagging 59
- 6.5 Multiprocessor Operation 62
- 7 Position Decoding 65
- 7.2.2 Resolution 67
- 7.2.3 Reference Tracks 68
- 7.2.4 Hysteresis 73
- 7.2.5 Forcing the IP Outputs 77
- 7.3.2 Control Function Block 87
- 67: KH = 7450; 99
- Position Decoding IP 240 100
- IP 240 Position Decoding 101
- 8 Counting 126
- Counting IP 240 127
- 8.2.2 Final Value 128
- 8.2.3 Forcing the IP Output 128
- IP 240 Counting 130
- 8.3.2 Control Function Block 136
- 9 IP 252 Expansion 156
- IP 252 Expansion IP 240 157
- IP 240 IP 252 Expansion 158
- YOU must 159
- 9.4.2 Data Block Contents 162
- 10 Positioning 167
- 10.1.2 Functional Description 168
- IP 240 Positioning 169
- Positioning IP 240 170
- Switching the IP outputs 173
- 10.3 Numerical Representation 176
- - Actual value 178
- 10.4 Axis Types 180
- 10.4.1 Linear Axis 180
- 10.4.2 Rotary Axis 181
- 10.5 Switching the IP Outputs 183
- 10.7 Actual Value Generation 189
- 10.7.1 Resolution (AFL) 190
- · Specified resolution 191
- 10.7.2 Zero Offset 192
- A negative value must be spe 194
- = - 2,000 194
- a 214
- 10.14 Selecting a Position 216
- 10.14.2 Selecting Position 0 218
- DR n+3 231
- : JU FB 168 232
- 10.23.1 The Data Block 241
- DW 32 to 242
- = 0 Relative zero offset 248
- • Actual value 253
- Format Description 258
- Exceeding 255 260
- With offset 15 you address: 297
- 11.1.1 Status Register 298
- Read error codes 300
- IDLE=1? 301
- 11.4.1 Position Decoding Mode 306
- 11.4.2 Counting Mode 310
- 11.4.3 Reading Error Messages 313
- 11.5 Sample Programs 314
- 12 Response Times 321
- Response Times IP 240 322
- IP 240 Response Times 323
- 12.3 Firmware Execution Times 324
- 13 Encoder Signals 329
- 13.1.2 Timing Requirements 330
- IP 240 Encoder Signals 331
- Encoder Signals IP 240 332
- EWA 4NEB 811 6120-02 a 335
- 14 Error Messages 337
- Invalid hysteresis 338
- 14.2.2 Communications Errors 339
- 14.4.1 Parameter Errors 339
- 14.4.2 Data Errors 340
- =02 Error on selecting HASY 341
- 14.4.3 Communications Errors 342
- Adapter Casing (S5 Adapter) 343
- A.1 Prerequisites 344
- A.4 Interrupt Processing 347
- A.5 Technical Specifications 348
- Addressing S5 Modules 349
- (Adapter Casing and IM 463-2) 349
- B.1 Addressing S5 Modules 350
- I/O area (P area) 351
- Page area 351
- Positioning Module 353
- C.1 Overview 354
- Example: 355
- Standard functions: 355
- Examples: 355
- C.2 Counting Functions 356
- Function FC 171 (STRU_DOS) 356
- Function FC 172 (STEU_DOS) 357
- EWA 4NEB 811 6120-02b 358
- Function FC 164 (STRU_WEG) 359
- Function FC 170 (STEU_WEG) 360
- C.4 Positioning Functions 362
- Function FC 167 (STRU_POS) 362
- Function FC 168 (STEU_POS) 363
- Addresses 368
- Cyclic Program 370
- Interrupt Program 371
- DB 170.DBB 45 Hysteresis 377
- IP 240 Index 388
- Index IP 240 389
- 6-1, 10-12, 10-13 393
- 6-1, 7-1 ... 7-3, 7-5 397
- EWA 4NEB 811 6120-02 398
- 5 Operation 409
- 5.1.1 IRx Interrupt Circuits 410
- 5.1.2 I/O Byte 0 (PY) 411
- Master or Slave 412
- Enable for I/O byte 0 412
- IP 240 Operation 413
- 5.2 Output Inhibit (BASP) 414
Relacionado con productos y manuales para Detectores de humo Siemens IP-Module
(58 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.057 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales