Siemens ET 757 E Series Instrucciones de operaciones descargar pdf (Pagina 108)

Commissioning and optimization (software)

7.4 Commissioning of communication between the S7 CPU and the frequency converter

ET 200pro FC

108 Operating Instructions, 11/2007, A5E01100763B AA

Error values in parameter responses

Table 7-14 Error values in parameter responses

Error

value

Meaning Remark Additional

inf.

0x00 Invalid parameter number Access to a non-existent parameter. –

0x01 Parameter value cannot be

modified.

Attempt to modify a read-only

parameter.

Subindex

0x02 Low or high limit exceeded Attempted modification with value

outside limits.

Subindex

0x03 Invalid subindex Access to non-existing subindex. Subindex

0x04 No field Access with subindex to non-indexed

parameter.

–

0x05 Incorrect data type Attempt to modify with a value which is

incompatible with the data type of the

parameter.

–

0x06 Invalid "Set" action (only reset is

allowed)

Attempt to modify with a value unequal

0 in a situation where this is not

allowed.

Subindex

0x07 The descriptive element cannot be

modified.

Attempt to modify a read-only

descriptive element.

Subindex

0x09 No descriptive data Access to a non-existent description

(parameter value exists).

–

0x0B No priority active Attempted modification without active

priority.

–

0x0F No text field available Attempt to access a non-existent text

field (parameter value exists).

–

0x11 Request cannot be executed on

account of the operating state

Access is temporarily disabled for

unspecified reasons.

–

0x14 Invalid value Attempt to modify with a value which

lies within the limits, however, is

invalid for other permanently valid

reasons (parameters with permanently

defined values).

Subindex

0x15 Response too long The length of the present response

exceeds the maximum transfer length.

–

0x16 Invalid parameter address Invalid or unsupported value for

attribute, number of elements,

parameter number, subindex, or a

combination of these.

–

0x17 Invalid format Write request for an invalid or

unsupported parameter data format.

–

0x18 Inconsistent qty. of values Write request - The number of values

in parameter data and the number of

elements in the parameter address do

not match.

–

0x19 Drive object is not present Access to a drive object which is not

present.

–

0x20 The parameter text element cannot

be modified.

Attempt to modify a read only

parameter text element.

Subindex

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 189 190

Comentarios a estos manuales

Sin comentarios

Siemens ET 757 E Series Instrucciones de operaciones Pagina 108

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Siemens ET 757 E Series