Siemens SISTORE AX16 Manual de usuario Pagina 95
- Pagina / 126
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Operation
95
Siemens Building Technologies
Fire Safety & Security Products 12.2008
If the DVR’s time and date have been reset to a time that is earlier than some
recorded video, it is possible for the DVR to have more than one video stream in
the same time range. In this case, the overlapping time range in the record table
will be separated by a yellow vertical line.
NOTE
The recorded data in the time range located after the yellow vertical line is the latest.
There are two view modes. Selecting
(Standard view) or
(Expanded view)
located at the bottom switches to the other view mode. Standard view displays
combined recording information of all camera channels currently displayed on the
screen. Expanded view displays the recording information of each camera channel
currently displayed on the screen.
Selecting
or
located at the bottom zooms the record table. Selecting
displays eight hours (1-minute based), and selecting
displays 24 hours (3-
minute based) at once. To move to earlier or later times that are not shown in the
current record table screen, select the arrows located at the end of the times by
using the arrow buttons on the front panel or remote control.
NOTE
If the DVR has images recorded in more than one recording mode in the same time range, the
recording status bar displays recording information in the following priority order: Panic Æ Pre-Event
Æ Event Æ Time. The colour of the bar indicates different recording modes: Red for Panic, White for
Pre-Event, Yellow for Event, and Blue for Time.
Selecting located at the bottom displays the Search menu.
Selecting
located at the bottom displays the Calendar Search screen.
Days with
recorded video display
on the calendar with white numbers. You can highlight the
days with recorded video by using the arrow buttons. Once you have highlighted a
day, press the
button to select it. The first recorded image of the selected date
will pause on the screen. Once you have selected the date you want to search,
review the surrounding video by using the playback controls located at the bottom.
Refer to Section 9.9: Playing recorded video for information regarding playback
controls.
Selecting
located in top-left corner exits the Record Table Search screen.
NOTE
It is possible that no recorded image displays on the current screen. Press the Display button and
change the screen mode to 4x4. You will be able to easily see the camera have recorded video during
target time.
- Building Technologies 1
- Contents 5
- 1 Safety 9
- 1.2.1 Transport 10
- 1.2.2 Installation 10
- 2 Directives and standards 12
- 3 Technical data 13
- 4 Details for ordering 15
- 5 Scope of delivery 15
- 6 Description of functions 16
- 7 Installation 18
- 7.3 Connecting the monitor 19
- 7.4 Connecting audio 20
- 7.5 Connecting alarms 20
- 7.11 Factory reset 23
- 8 Configuration 25
- Configuration 26
- 8.2 Turning on the power 28
- 8.3 Initial unit setup 28
- 8.4 Setup screen 29
- 8.5 Recording settings 30
- 8.5.2 Schedule screen 32
- 8.5.3 Pre-Event screen 35
- 8.5.4 Archive screen 36
- 8.6 Network setup 37
- 8.6.2 Web Client Setup 40
- 8.6.3 LAN setup screen 41
- 8.7 Event settings 44
- 8.7.3 Video Loss screen 51
- 8.7.4 Text-In screen 53
- 8.7.5 System Event screen 57
- 8.7.6 Event status 60
- 8.8 Display 61
- 8.8.2 Main Monitor screen 62
- 8.8.3 Spot Monitor screen 63
- 8.9 Configuring devices 64
- 8.9.2 Audio setup screen 67
- 8.9.3 Alarm-Out screen 67
- 8.9.4 Remote Control screen 69
- 8.10 Storage screen 70
- 8.11 System 73
- 8.11.2 Date/Time setup 76
- Î The current date appears 77
- 8.11.3 User setup screen 79
- 8.11.4 Shutdown… screen 81
- 8.11.5 Log out…screen 81
- 9 Operation 82
- 9.2.1 Active Cameo mode 83
- 9.2.2 PIP mode 83
- 9.2.3 Zoom mode 83
- 9.2.4 PTZ mode 84
- 9.2.5 Image adjustment 86
- 9.3 Event monitoring 87
- 9.4 Covert camera 87
- 9.5 Spot monitoring 87
- 9.6 Using a mouse 88
- 9.7 Recording video 89
- 9.8 Recording audio 90
- 9.9 Playing recorded video 90
- 9.10 Searching video 92
- 9.10.1 Go to 93
- 9.10.2 Calendar Search 93
- 9.10.3 Record Table Search 94
- 9.10.4 Event Log Search 96
- 9.10.5 Text-In Search 98
- 9.10.6 Motion Search 100
- 9.10.7 Clip-Copy screen 102
- 9.10.8 Print screen 104
- 9.10.9 Disk mirroring 105
- 10 Troubleshooting 107
- 11 Disposal 107
- 12 Appendix 108
- 12.2.1 Search example I 109
- 12.2.2 Search example II 110
- 12.3 Web Client 111
- 12.3.1 Web View mode 112
- 12.3.2 Web Play mode 114
- 12.4 Time overlap 116
- 12.5 Recording tables 117
- Appendix 118
- 12.6 Connector pin outs 119
- 12.7 Connection diagrams 120
- 12.8 Map of screens 122
- 12.9 System log notices 123
- 12.10 Error code notices 124
Relacionado con productos y manuales para Cámaras De Seguridad Siemens SISTORE AX16
(92 paginas)
(208 paginas)
(26 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales