
Operation
104
Siemens Building Technologies
Fire Safety & Security Products 12.2008
NOTE
Only 4.7 GB DVD media is available. To clip copy video on the DVD media using remaining space, the
size of previously recorded data on the DVD media should be less than 4 GB.
NOTE
Select the Full Erase option when erasing recorded data on DVD media, otherwise the media will not
operate properly when rewritten.
NOTE
The file size for clip copy is limited to 30GB. When copying video clips larger than 2GB, the video clips
will be save in units of 2GB. For example, 3 individual 2GB files will be created when saving a 6GB
video clip. However, the file size for the One-Touch Clip Copy is limited to 2GB.
You can use other functions on the DVR while video is being backed up. To do
this, highlight the Close button and press the
button. You can return to the Clip-
Copy screen at any time to check the progress.
You do not need to install any special software on your personal computer to
review the video clips. Refer to the RAS manual for instructions on how to review
video clips you have copied.
NOTE
During Clip Copy, you cannot shut the system down, clear data on the storage device, or format the
storage device.
NOTE
Do not disconnect the USB cable or the power from the external drive while copying video clips. If the
external drive is shut down or the USB cable is disconnected while copying video clips, THE DVR
SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL DRIVE COULD BE DAMAGED, and
you will get an error message the next time you try to copy video clips. You will need to power down
the DVR and restart it to get rid of the error message. Once the file system of the USB hard disk drive
has been corrupted, this error message cannot be dismissed. Even after restarting the DVR it may
automatically restart while preparing to clip copy. You must recover the file system using the recovery
program, or you must reformat the hard disk drive.
9.10.8 Print screen
You can print images from the screen. Connect a PostScript™ printer to one of the
USB ports. A message appears asking you if you want to print the current image.
Fig. 125 Print screen
NOTE
If your printer only supports an LPT connection (parallel), use an LPT to USB converter cable. The
printer cable is not provided.
Comentarios a estos manuales