Siemens SISTORE AX16 Manual de usuario descargar pdf (Pagina 49)

Configuration

Siemens Building Technologies

Fire Safety & Security Products 12.2008

Highlighting Daytime Setup and pressing the button allow you to set up the

Daytime range.

Fig. 53 Daytime Setup screen

1. Highlight the box beside Daytime and press the

button.

2. Use the Up and Down arrow buttons to set the Daytime range.

Î The DVR will consider the remaining time range as the Nighttime.

3. Highlight the Actions 1 and Actions 2 tabs.

Î The Motion Detection Actions 1 and Actions 2 screens display.

Fig. 54 Motion Detection Actions 1 screen

Actions 1

The DVR can be set to react to motion detection differently for each camera. Each

camera can be associated with another camera, trigger an Alarm-Out connector,

sound the DVR’s internal buzzer, notify a number of different devices, and/or move

PTZ cameras to preset positions.

NOTE

You can associate multiple cameras with a camera that detects motion.

1. Highlight the box under the Record heading and press the button.

Î A list of cameras appears.

You can associate as many cameras with that camera as you wish. If the

DVR detects motion on the selected camera, it starts recording video from all

the associated cameras.

NOTE

For the Record action, the camera you select should be set to the Event or Time & Event recording

mode in the Record Schedule setup screen.

2. Highlight the box under the Alarm-Out heading and press the button.

Î A list of Alarm Outputs appears.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 125 126

Sin comentarios

Siemens SISTORE AX16 Manual de usuario Pagina 49