Siemens SISTORE AX16 Manual de usuario Pagina 26
- Pagina / 126
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuration
26
Siemens Building Technologies
Fire Safety & Security Products 12.2008
Fig. 21 Infrared remote control
Power LED The Power LED is lit when the unit is On.
Network LED The Network LED flickers when the unit is connected to a network via
Ethernet.
HDD LED The HDD LED flickers when the DVR is recording or searching video on the
hard disk drive.
Camera buttons
(1 to 16)
Pressing the individual camera buttons will cause the selected camera to
display full screen. Buttons 1 to 9 are also used to enter passwords.
PTZ button
Pressing the PTZ button enters the PTZ (Pan/Tilt/Zoom) mode which allows
you to control properly configured cameras.
Display button
Pressing the Display button toggles between different display formats. The
available formats are: 4x4, 3x3, 2x2 and PIP (not all formats are available
for the 8-channel DVR). The button is also used for Zoom In while in the
PTZ mode.
Sequence button
When in the live mode, pressing the Sequence button displays another full
live channel sequentially. When in one of the multi-view formats, pressing
this button will cause the DVR to sequence cameras in two sequence
modes: “Page” and “Cameo”. In the Page mode, the DVR sequences
through user-defined screen layouts (pages). In the Cameo mode, the
bottom, right screen to display live cameras sequentially. Pressing the
Sequence button while in the Sequence mode will exit the Sequence mode.
The button is also used for Zoom Out while in the PTZ mode.
Freeze button
Pressing the Freeze button freezes the current live screen. In the Search
mode clip-copying can be done instantly by pressing and holding the button
for two or more seconds. The button is also used for Near Focus in the PTZ
mode.
Alarm button
The Alarm button has two functions. First, it will reset the DVR’s outputs
including the internal buzzer during an alarm. Second, it will display the
event log when you are in the live monitoring mode unless there is an active
alarm. This operation can be user password protected. The button is also
used for Far Focus while in the PTZ mode.
Spot button
Pressing the Spot button allows you to select which cameras will display on
the four Spot Monitors. After selecting the monitor you can opt to have that
Spot Monitor display a single camera or all cameras sequentially. The
infrared remote control allows you to go directly to the individual Spot
Monitor menus. The button is also saves Presets in PTZ mode.
- Building Technologies 1
- Contents 5
- 1 Safety 9
- 1.2.1 Transport 10
- 1.2.2 Installation 10
- 2 Directives and standards 12
- 3 Technical data 13
- 4 Details for ordering 15
- 5 Scope of delivery 15
- 6 Description of functions 16
- 7 Installation 18
- 7.3 Connecting the monitor 19
- 7.4 Connecting audio 20
- 7.5 Connecting alarms 20
- 7.11 Factory reset 23
- 8 Configuration 25
- Configuration 26
- 8.2 Turning on the power 28
- 8.3 Initial unit setup 28
- 8.4 Setup screen 29
- 8.5 Recording settings 30
- 8.5.2 Schedule screen 32
- 8.5.3 Pre-Event screen 35
- 8.5.4 Archive screen 36
- 8.6 Network setup 37
- 8.6.2 Web Client Setup 40
- 8.6.3 LAN setup screen 41
- 8.7 Event settings 44
- 8.7.3 Video Loss screen 51
- 8.7.4 Text-In screen 53
- 8.7.5 System Event screen 57
- 8.7.6 Event status 60
- 8.8 Display 61
- 8.8.2 Main Monitor screen 62
- 8.8.3 Spot Monitor screen 63
- 8.9 Configuring devices 64
- 8.9.2 Audio setup screen 67
- 8.9.3 Alarm-Out screen 67
- 8.9.4 Remote Control screen 69
- 8.10 Storage screen 70
- 8.11 System 73
- 8.11.2 Date/Time setup 76
- Î The current date appears 77
- 8.11.3 User setup screen 79
- 8.11.4 Shutdown… screen 81
- 8.11.5 Log out…screen 81
- 9 Operation 82
- 9.2.1 Active Cameo mode 83
- 9.2.2 PIP mode 83
- 9.2.3 Zoom mode 83
- 9.2.4 PTZ mode 84
- 9.2.5 Image adjustment 86
- 9.3 Event monitoring 87
- 9.4 Covert camera 87
- 9.5 Spot monitoring 87
- 9.6 Using a mouse 88
- 9.7 Recording video 89
- 9.8 Recording audio 90
- 9.9 Playing recorded video 90
- 9.10 Searching video 92
- 9.10.1 Go to 93
- 9.10.2 Calendar Search 93
- 9.10.3 Record Table Search 94
- 9.10.4 Event Log Search 96
- 9.10.5 Text-In Search 98
- 9.10.6 Motion Search 100
- 9.10.7 Clip-Copy screen 102
- 9.10.8 Print screen 104
- 9.10.9 Disk mirroring 105
- 10 Troubleshooting 107
- 11 Disposal 107
- 12 Appendix 108
- 12.2.1 Search example I 109
- 12.2.2 Search example II 110
- 12.3 Web Client 111
- 12.3.1 Web View mode 112
- 12.3.2 Web Play mode 114
- 12.4 Time overlap 116
- 12.5 Recording tables 117
- Appendix 118
- 12.6 Connector pin outs 119
- 12.7 Connection diagrams 120
- 12.8 Map of screens 122
- 12.9 System log notices 123
- 12.10 Error code notices 124
Relacionado con productos y manuales para Cámaras De Seguridad Siemens SISTORE AX16
(92 paginas)
(208 paginas)
(26 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.116 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales