Siemens SISTORE AX16 Manual de usuario descargar pdf (Pagina 63)

Configuration

Siemens Building Technologies

Fire Safety & Security Products 12.2008

You can define the screen layout in a variety of formats and set the DVR to

sequence through the different screen layouts (pages) so that all the cameras will

be displayed. You can also set up the DVR to display one camera or a group of

cameras all the time while cycling through the remaining cameras in a “cameo”

window. This can be done with one camera displayed full screen while displaying

the cameo window as a PIP (picture in picture), or displaying the cameras in a grid

pattern with the bottom right window as the cameo.

NOTE

Sequence cannot be used in the 4x4 display mode of the 16-channel, and 3x3 mode of the 8-channel

DVR.

You can adjust the display dwell time by highlighting the box beside Interval and

pressing the

button.

Î You can select dwell intervals ranging from 1 second to 1 minute.

Highlight Event Monitoring On and press the

button.

Î Pressing the button toggles between On and Off.

Î When it is On, the DVR will display the camera associated with the event when

an event occurs.

8.8.3 Spot Monitor screen

1. Highlight Spot Monitor in the Display menu and press the button.

Î The Spot Monitor setup screen displays.

Fig. 72 Spot Monitor screen

You can define which cameras display sequentially on the Spot Monitors.

2. Highlight the box in the Channels column for the desired Spot Monitor and

press the

button.

Î You can save your Display settings by highlighting Save and pressing the

button.

Î Selecting Cancel exits the screen without saving the changes.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 125 126

Sin comentarios

Siemens SISTORE AX16 Manual de usuario Pagina 63