Siemens SISTORE AX16 Manual de usuario descargar pdf (Pagina 88)

Operation

Siemens Building Technologies

Fire Safety & Security Products 12.2008

If you want to display more than one camera on a Spot Monitor, you can display

them sequentially. In the Spot Monitor selection mode, press the Sequence button

on the front panel or remote control, or select Sequence On from the menu to start

displaying cameras sequentially. Press the Sequence button or select Sequence

On again to stop sequencing on the Spot Monitor. Any cameras that are Off, have

lost video or are set to Covert (unless the user has authority to view covert

cameras) will be excluded from the sequence.

Fig. 107 Sequence menu

When the Spot Monitor is in the sequence mode, you can set the camera’s display

dwell time. Refer to Section 8: Configuration for details.

9.6 Using a mouse

You can use a mouse instead of the front panel buttons to perform many of the

DVR functions. The following operations are supported when using a mouse during

live monitoring.

When in one of the multi-view formats (e.g., PIP, 2x2, 3x3 or 4x4), clicking the

mouse button on a camera image switches that camera to full screen. Clicking the

mouse button again returns to the previous multi-view format.

When in one of the multi-view formats, scrolling the mouse wheel up and down

operates the same as pressing the Display button by switching the screen format

between PIP, 2x2, 3x3 and 4x4.

Clicking the right mouse button during live monitoring displays the following menu:

Fig. 108 Mouse menu

Selecting Freeze, PTZ… and Spot Monitor… is the same as pressing the Freeze,

PTZ and Spot buttons as described above in Section 9.2: Live monitoring.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 125 126

Sin comentarios

Siemens SISTORE AX16 Manual de usuario Pagina 88