Siemens SISTORE AX16 Manual de usuario Pagina 65
- Pagina / 126
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuration
65
Siemens Building Technologies
Fire Safety & Security Products 12.2008
NOTE
The maximum recording speed of each camera group will be limited to 100 ips when set to
Standard
resolution, 50 ips when set to High resolution and 25 ips when set to Very High resolution
for all
cameras.
When set to High resolution for all cameras within the same camera group, the DVR records video
from each camera as fast as possible according to the preset recording speed within the total ips of
each camera group. When the total ips are higher than the maximum recording speed of the camera
group, the ips of each camera might decrease so as not to exceed the maximum recording speed. For
example, if set to High resolution for all cameras within the same camera group of the 8-channel
model DVR, 15 ips for Time recording and 25 ips for Event recording, the event-driven video from one
camera will be recorded at 20 ips and the video from the three other cameras will be recorded at 10
ips each when events are detected by one camera.
The maximum recording speed per camera will be 6 ips per camera when set to On and Very High
resolution for four cameras in the same camera group of the 16-channel DVR. See the table below.
No. of cameras set to On and Very High resolution
0 1 2 3 4 5 6 7 8
─ 25 ips 12 ips 8 ips 6 ips 5 ips 4 ips 3 ips 3 ips
The maximum recording speed per camera will be 12 ips per camera when set to On and Very High
resolution for two cameras in the same camera group of the 8-channel DVR. See the table below.
No. of cameras set to On and Very High resolution
0 1 2 3 4
─ 25 ips 12 ips 8 ips 6 ips
1. Highlight the PTZ tab, and the PTZ setup screen displays.
Fig. 75 Camera PTZ setup screen
NOTE
You will only be able to set up PTZ devices if the PTZ port is set to RS232 or RS485.
2. Highlight the box in the Product column for the PTZ camera you wish to
configure and press the
button.
Î A list of PTZ devices appears.
3. Select your camera from the list and press the
button.
Î You will need to connect the camera to the RS232 or RS485 connector on the
back of the DVR following the camera manufacturer’s instructions.
- Building Technologies 1
- Contents 5
- 1 Safety 9
- 1.2.1 Transport 10
- 1.2.2 Installation 10
- 2 Directives and standards 12
- 3 Technical data 13
- 4 Details for ordering 15
- 5 Scope of delivery 15
- 6 Description of functions 16
- 7 Installation 18
- 7.3 Connecting the monitor 19
- 7.4 Connecting audio 20
- 7.5 Connecting alarms 20
- 7.11 Factory reset 23
- 8 Configuration 25
- Configuration 26
- 8.2 Turning on the power 28
- 8.3 Initial unit setup 28
- 8.4 Setup screen 29
- 8.5 Recording settings 30
- 8.5.2 Schedule screen 32
- 8.5.3 Pre-Event screen 35
- 8.5.4 Archive screen 36
- 8.6 Network setup 37
- 8.6.2 Web Client Setup 40
- 8.6.3 LAN setup screen 41
- 8.7 Event settings 44
- 8.7.3 Video Loss screen 51
- 8.7.4 Text-In screen 53
- 8.7.5 System Event screen 57
- 8.7.6 Event status 60
- 8.8 Display 61
- 8.8.2 Main Monitor screen 62
- 8.8.3 Spot Monitor screen 63
- 8.9 Configuring devices 64
- 8.9.2 Audio setup screen 67
- 8.9.3 Alarm-Out screen 67
- 8.9.4 Remote Control screen 69
- 8.10 Storage screen 70
- 8.11 System 73
- 8.11.2 Date/Time setup 76
- Î The current date appears 77
- 8.11.3 User setup screen 79
- 8.11.4 Shutdown… screen 81
- 8.11.5 Log out…screen 81
- 9 Operation 82
- 9.2.1 Active Cameo mode 83
- 9.2.2 PIP mode 83
- 9.2.3 Zoom mode 83
- 9.2.4 PTZ mode 84
- 9.2.5 Image adjustment 86
- 9.3 Event monitoring 87
- 9.4 Covert camera 87
- 9.5 Spot monitoring 87
- 9.6 Using a mouse 88
- 9.7 Recording video 89
- 9.8 Recording audio 90
- 9.9 Playing recorded video 90
- 9.10 Searching video 92
- 9.10.1 Go to 93
- 9.10.2 Calendar Search 93
- 9.10.3 Record Table Search 94
- 9.10.4 Event Log Search 96
- 9.10.5 Text-In Search 98
- 9.10.6 Motion Search 100
- 9.10.7 Clip-Copy screen 102
- 9.10.8 Print screen 104
- 9.10.9 Disk mirroring 105
- 10 Troubleshooting 107
- 11 Disposal 107
- 12 Appendix 108
- 12.2.1 Search example I 109
- 12.2.2 Search example II 110
- 12.3 Web Client 111
- 12.3.1 Web View mode 112
- 12.3.2 Web Play mode 114
- 12.4 Time overlap 116
- 12.5 Recording tables 117
- Appendix 118
- 12.6 Connector pin outs 119
- 12.7 Connection diagrams 120
- 12.8 Map of screens 122
- 12.9 System log notices 123
- 12.10 Error code notices 124
Relacionado con productos y manuales para Cámaras De Seguridad Siemens SISTORE AX16
(92 paginas)
(208 paginas)
(26 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.044 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales