Siemens SISTORE AX16 Manual de usuario descargar pdf (Pagina 42)

Configuration

Siemens Building Technologies

Fire Safety & Security Products 12.2008

Fig. 40 Port Numbers setup screen

7. Change the numbers by highlighting them and using the Up and Down arrow

buttons to increase or decrease the number.

The factory default port settings are:

Remote Admin: 8200

Remote Callback: 8201

Remote Watch: 8016

Remote Search: 10019

Remote Audio: 8116

NOTE

The system restarts automatically after changing the port settings.

NOTE

Do NOT use the same port number for two different programs, otherwise, the DVR cannot be

connected with the PC running RAS or Web Client.

NOTE

When changing the port settings, you must change the port settings on the PC running RAS or Web

Client as well. Refer to the RAS manual for details.

Î Selecting "DHCP" from the Type and highlighting the Save button reads the

current IP address of the DVR configured by DHCP (Dynamic Host

Configuration Protocol) network.

Fig. 41 LAN (DHCP) setup screen

Î Selecting "ADSL (with PPPoE)" allows you to set up the ADSL network.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 125 126

Sin comentarios

Siemens SISTORE AX16 Manual de usuario Pagina 42