Siemens SISTORE AX16 Manual de usuario descargar pdf (Pagina 47)

Configuration

Siemens Building Technologies

Fire Safety & Security Products 12.2008

8.7.2 Motion Detection screen

Highlight Motion Detection in the Event menu and press the button.

Î The Motion Detection setup screen appears.

Fig. 48 Motion Detection Settings screen

Settings

Your DVR has built-in video motion detection. Video motion detection can be

turned On or Off for each camera.

Highlighting the box under the Sensitivity heading and pressing the

button

allows you to adjust the DVR’s sensitivity to motion for Daytime and Nighttime

independently. There are five settings with 1 being the least sensitive and 5 being

the most sensitive.

Fig. 49 Motion Detection Sensitivity screen

You can adjust the minimum number of detection blocks that must be activated to

trigger a motion alarm. Highlighting the box under the Min. Blocks heading and

pressing the

button allow you to adjust the minimum number of detection blocks

for Daytime and Nighttime independently. Smaller numbers provide greater

sensitivity because fewer detection blocks must be activated.

Fig. 50 Motion Detection Min. Blocks screen

Turning Zone View On will allow you to observe how the DVR is reacting to

motion. When in the motion viewing mode, the detection zone of video will be

displayed. Any detected motion within the zone will be displayed in red.

You can define the area of the image where you want to detect motion; e.g., a

doorway. Highlight the box under the Zone heading, and press the

button.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 125 126

Sin comentarios

Siemens SISTORE AX16 Manual de usuario Pagina 47