Siemens IEEE802.11 Instrucciones de operaciones descargar pdf (Pagina 258)

Configuring with Web Based Management

5.9 "Security" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

258 Configuration Manual, 11/2014, C79000-G8976-C323-03

Procedure

1. Enter at least one WEP key.

2. Click the "Set Values" button.

5.9.3

Management ACL

Description of configuration

On this page, you can increase the security of your device. To specify which station with

which IP address is allowed to access your device, configure the IP address or an entire

address range.

You can select the protocols and the ports of the station with which it is allowed to access

the device. You define the VLAN in which the station may be located. This ensures that only

certain stations within a VLAN have access to the switch.

Description

The page contains the following boxes:

●

"Management ACL" check box

Enable or disable the function.

●

"IP Address" input box

Enter the IP address or the network address to which the rule will apply. If you use the IP

address 0.0.0.0, the settings apply to all IP addresses.

●

"Subnet Mask" input box

Enter the subnet mask. The subnet mask 255.255.255.255 is for a specific IP address. If

you want to allow a subnet, for example a C subnet, enter 255.255.255.0. The subnet

mask 0.0.0.0 applies to all subnets.

The table has the following columns:

●

Select

Select the check box in the row to be deleted.

●

Rule Order

Shows the number of the rule. If you click the "Create" button, a new row with a unique

number is created

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 291 292

Sin comentarios

Siemens IEEE802.11 Instrucciones de operaciones Pagina 258