Siemens IEEE802.11 Instrucciones de operaciones descargar pdf (Pagina 194)

Configuring with Web Based Management

5.6 "Interfaces" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

194 Configuration Manual, 11/2014, C79000-G8976-C323-03

●

"Mode Type" drop-down list

Note

This parameter cannot be configured for the SCALANCE W770/W730 devices. The value

is preset to "Autonegotiation" for both ports.

●

Mode

Shows the transmission speed and the transmission method of the port.

●

Negotiation

Shows whether the automatic configuration of the connection to the partner port is

enabled or disabled.

●

"MTU" input box

Enter the packet size above which packets are fragmented.

●

Link

Shows the connection status to the network. The available options are as follows:

– Up

The port has a valid link to the network, a link integrity signal is being received.

– Down

The link is down, for example because the connected device is turned off.

Changing the port configuration

Click the appropriate box to change the configuration.

Note

With various automatic functions, the

device prevents or reduces the effect on other ports

and priority classes (Class of Service) if a port is overloaded. This can mean that frames are

discarded even when flow control is enabled.

Port overload occurs when the device receives more frames than it can send, for example as

the result of different transmission speeds.

Procedure

Follow the steps below to change the settings:

1. Change the settings according to your configuration.

2. Click the "Set Values" button.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 291 292

Sin comentarios

Siemens IEEE802.11 Instrucciones de operaciones Pagina 194