Siemens IEEE802.11 Instrucciones de operaciones descargar pdf (Pagina 205)

Configuring with Web Based Management

5.6 "Interfaces" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

Configuration Manual, 11/2014, C79000-G8976-C323-03

205

Above the tables for the frequency bands, you will find the following check box:

●

Select / Deselect all

– Enabled

If you enable the check box, all channels are selected.

– Disabled

If you deselect the check box, the first valid channel of the frequency band remains

enabled. Enable the required channel.

The tables of the frequency bands have the following columns:

●

Radio

Shows the available WLAN interfaces in this column.

●

Radio Mode

Shows the mode.

●

Kanalnummer

To specify the valid channels for the required frequency band, select the appropriate

check box for the channel number.

The table displays the permitted channels of the country. Only the valid channels can be

enabled. Invalid channels are grayed out and cannot be enabled.

Note

To specify the channels,

the setting "Use Allowed Channels only" must be enabled.

Procedure

1. Enable the "Used Allowed Channels only" option for the required WLAN interface.

2. Deselect the "Select / Deselect all" check box.

3. Select the relevant check box for the required channel number.

4. Click the "Set Values" button.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 291 292

Sin comentarios

Siemens IEEE802.11 Instrucciones de operaciones Pagina 205