Siemens IEEE802.11 Instrucciones de operaciones descargar pdf (Pagina 257)

Configuring with Web Based Management

5.9 "Security" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

Configuration Manual, 11/2014, C79000-G8976-C323-03

257

Procedure

1. Enter the necessary values in the input boxes.

2. Select the required entry in the "Dot1x EAP Types" drop-down list.

3. Click the "Set Values" button.

5.9.2.5

Keys

Specifying the WEP key

To allow you to enable the encryption for the "Open System" and "Shared Key"

authentication methods, you must first enter at least one key in the key table.

Description

The table has the following columns:

●

Radio

Shows the available WLAN interfaces.

●

Key 1 - 4

Enter the WEP key or the AES key.

For the WEP key, characters of the ASCII code from 0x20 to 0x7E or hexadecimal

characters from 0x00 to 0xFF are permitted.

If iPCF or iPCF-MC mode is enabled, only the encryption method AES with 128-bit key

length is supported.

You can choose between the following key lengths:

– 5 or 13 ASCII or 10 or 26 hexadecimal characters (40/104 bits)

– 16 ASCII or 32 hexadecimal characters (128 bits)

Note

The hexadecimal characters

are entered without being preceded by "0x". One

hexadecimal character codes four bits. The entries "ABCDE" (ASCII characters) and

"4142434445" (hexadecimal characters) are therefore the same because the ASCII

character "A" has hexadecimal code "0x41".

●

Key 1 - 4 Confirmation

Confirm the WEP key.

1 2 ... 252 253 254 255 256 257 258 259 260 261 262 ... 291 292

Sin comentarios

Siemens IEEE802.11 Instrucciones de operaciones Pagina 257