Siemens IP-Module Especificaciones descargar pdf (Pagina 68)

Siemens TCP/IP Ethernet Driver Help

Note:

Automatic Tag Database Generation is only supported for the S7-300 and S7-400 device models.

Unable to generate a tag database for device <device name>. Reason: Failed

to read data from the STEP 7 project.

Error Type:

Warning

Possible Cause:

One of the files in the STEP 7 project folder is missing, invalid, or corrupt.

Solution:

Verify that the entire STEP 7 project folder is available at the location specified in the S7 project file parameter

(located in the Tag Import tab of Device Properties).

See Also:

Tag Import

Unable to generate a tag database for device <device name>. Reason: File

system error processing the STEP 7 project.

Error Type:

Warning

Possible Cause:

1. The STEP 7 project is in use and is locked.

2. The STEP 7 project is not accessible.

3. The disk is full or write-protected.

Solution:

1. Ensure that the STEP 7 project is not in use.

2. Ensure that the STEP7 project's file location is accessible and that its user permissions allow access.

3. Ensure that the disk is not full or write-protected.

Note:

The folder that contains the STEP 7 project file must be complete with all sub-folders and files.

See Also:

Tag Import

Unable to generate a tag database for device <device name>. Reason: Internal

driver error occurred.

Error Type:

Warning

Possible Cause:

Tag generation was unable to start due to an unknown error.

Solution:

Retry the tag generation.

www. kepware.com

68

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 84 85

Comentarios a estos manuales

Sin comentarios