Siemens IP-Module Especificaciones descargar pdf (Pagina 36)

Siemens TCP/IP Ethernet Driver Help

5. In the server, create a new channel. In Device Driver, select Siemens TCP/IP Ethernet Driver from

the drop-down list. Continue through the channel wizard, specifying channel properties as needed. Then,

click Finish.

6. Next, create a new device. In Model, select S7-1500 from the Device Model drop-down list. Continue

through the device wizard, specifying device properties as needed. Then, click Finish.

Note: The controller Protection settings are directly related to the device returning protocol error [Class=0x81,

Code=0x04]. If this error occurs, the controller's memory (such as the Simatic memory card) may need to be

reset. Once the controller's memory is reset, downloading the S7 project to the controller should not prompt for a

password.

www. kepware.com

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 84 85

Sin comentarios

Siemens IP-Module Especificaciones Pagina 36