Siemens IP-Module Especificaciones descargar pdf (Pagina 24)

Siemens TCP/IP Ethernet Driver Help

That completes the configuration of the four connections that were selected.

Note:

Notice that the Local TSAP in the Connection dialog was automatically advanced for each connection. This

TSAP number will need to be used in the OPC server setup when defining a device as the remote TSAP number.

Step 6: CRC and Keep Alive Interval

Optional: Enable CRC protection to monitor for accidental configuration corruption.

1. Set the Keep Alive Interval. The longer the interval, the longer the connection between the device and the

OPC server will exist during idle time. A long Keep Alive Interval may not be desirable if connections are being

shared (nonconcurrent). Each remote client will need to wait this amount of time before it will be able to connect

with the device once the last connected remote client is finished communications. The 30 second default is

suggested.

www. kepware.com

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 84 85

Sin comentarios

Siemens IP-Module Especificaciones Pagina 24