Siemens IP-Module Especificaciones descargar pdf (Pagina 31)

Siemens TCP/IP Ethernet Driver Help

3. Configure the desired number of PG/OP and PC (S7 Communication) connections.

Type Description

PG Communication Used for program loading, diagnostics

OP Communication Used for operator control and monitoring

S7 Standard

Communication

Communication connections not configured, MPI communications with PUT/GET

function blocks

S7 Communication (PC) Configured connections, data communications

Note:

The maximum number of PC connections for the CPU equals the Maximum Number of Connection Resources

minus the S7 Standard Communication resources minus the OP Communication resources minus the PG

Communication resources. Note that the Maximum Number of Connection Resources is based on the

CPU/version/firmware.

In the example shown above, there are six S7 communication (PC) connections available (12-4-1-1=6). Likewise,

the number of PG and OP connections can be increased using the same concept.

If the Device returned protocol [Class=0x83, Code=0x04] error is encountered, increase the number of S7

Standard Communication connections, thereby decreasing the number of S7 Communication connections.

4. After the connections have been configured, click OK. Next, in the main HW Config window click Station |

Save and Compile.

5. Click PLC | Download to commit to the changes.

How To Configure S7-1200 Connections with the Totally Integrated Automation

(TIA) Portal

to configure the S7-1200 for communications with the Siemens TCP/IP Ethernet Driver, an online connection is

required between the programming device and the target system. Users may have to configure the programming

device to talk to the target system. For more information, follow the instructions below.

www. kepware.com

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 84 85

Sin comentarios

Siemens IP-Module Especificaciones Pagina 31