Siemens IP-Module Especificaciones descargar pdf (Pagina 5)

Siemens TCP/IP Ethernet Driver Help

Help version 1.065

CONTENTS

Overview

What is the Siemens TCP/IP Ethernet Driver?

Device Setup

How do I configure a device for use with this driver?

Optimizing Siemens TCP/IP Ethernet Communications

How do I get the best performance from the Siemens TCP/IP Ethernet Driver?

Data Types Description

What data types does this driver support?

Address Descriptions

How do I address a data location on a Siemens TCP/IP device?

Error Descriptions

What error messages does the Siemens TCP/IP Ethernet Driver produce?

Overview

The Siemens TCP/IP Ethernet Driver provides a reliable way to connect Siemens TCP/IP Ethernet devices to OPC

client applications, including HMI, SCADA, Historian, MES, ERP, and countless custom applications. It is intended

for use with Siemens S7-200, 300, 400, and 1200 PLCs. There are two options for communications:

l Industrial Ethernet TCP/IP interface communication processor (CP). The protocol used is S7 Messaging on

Industrial Ethernet (ISO 8073 Class 0) over TCP/IP as defined in RFC1006.

l Hilscher's NetLink adapter. Only an MPI port is required. The Netlink adapter does not support the S7-200

model.

The driver requires no special libraries or hardware. A standard Ethernet card is all that is needed.

www. kepware.com

1 2 3 4 5 6 7 8 9 10 ... 84 85

Sin comentarios

Siemens IP-Module Especificaciones Pagina 5