Siemens SINUMERIK 802D sl Manual de servicio descargar pdf (Pagina 28)

Setting-up

4.2 Limit stops

Manual Machine Plus Turning

28 Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0

Operating sequences

You can use the following methods to enter a limit stop position:

● Direct position entry:

– Select the input field of the relevant limit stop with the <Cursor keys>.

– Now use the <Numeric keys> to enter the absolute position you require.

– Press the <INPUT> key to accept the value.

● Accepting the current actual position:

– Select the input field of the relevant limit stop with the <Cursor keys>.

– Traverse to the required position using the axis direction switch (e.g. <-Z> or <+X/-

X/+Z>).

– Press the "Set limit stop" softkey.

The current actual position of the relevant axis is transferred to the input field.

Activating/disabling limit stops

The limit stops are activated/de-activated individually using the <SELECT> key.

You can select between ON and OFF.

=

6HW

OLPLWVWRS

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 129 130

Sin comentarios

Siemens SINUMERIK 802D sl Manual de servicio Pagina 28