Siemens SINUMERIK 802D sl Manual de servicio descargar pdf (Pagina 100)

Manual machining

5.4 Manual machining using cycles (functions)

Manual Machine Plus Turning

100 Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0

Input fields

The input fields in the "Roughing F" screen form have the following meanings:

Parameter Description

Length l Enter here the length of the end face to be cut, taking the contour start position

("Reference z0") in the longitudinal axis (Z axis) as the starting point.

Diameter d1 External diameter of the end face to be cut (absolute position of the X axis in the

diameter).

Diameter d2 Internal diameter of the end face to be cut (absolute position of the X axis in the

diameter).

Max. infeed depth m1 Enter the maximum infeed depth for roughing. The internal infeed calculation

ensures that the infeed is as uniform as possible throughout the roughing operation.

This entry value represents the maximum value possible and is therefore not

exceeded.

Finishing allowance m2 Finishing allowance in the X axis (m2x)

Finishing allowance in the Z axis (m2z)

The following option is available for the position of the geometry:

Figure 5-61 Roughing cycle F, position "Outside left"

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 129 130

Sin comentarios

Siemens SINUMERIK 802D sl Manual de servicio Pagina 100