Siemens SINUMERIK 802D sl Manual de servicio descargar pdf (Pagina 18)

Turning On, Reference Point Approach

3.1 Entry to the "Manual Machine Plus" operating area

Manual Machine Plus Turning

18 Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0

3. You can access the "Manual Machine Plus" area by clicking on softkey "Manual":

Note

If you have not yet executed a reference point approach, the JOG REF operating mode

will be reselected automatically when you press the "Manual" softkey.

Figure 3-2 Reference point approach

4. The operating area "Manual Machine Plus" can be exited with the "CNC" softkey, after

which the operating area of the NC basic machine is active again.

Note

The manual machine cannot be exited in the "Execute cycles" and "Execution window"

screen forms of the stepping program.

General operating information

If a screen (e.g. for the "thread tapping" function) contains input fields, then you can edit

them as follows:

● Select the input fields using the <cursor keys>.

● Enter data using the <numeric keys>.

● Accept the data using the <INPUT key>.

● Use the <Tab key> to switch between the input fields and the selection box during the

opening and saving of files.

● If you do not want to accept an input value,then exist the corresponding field using

<Cursor key> or change the screen form. Do not press the <INPUT> key.

Note

The pictures in the parameterization screenforms depend on the setting of the machine data

by the machine manufacturer, i.e. display of the tool position before or behind the center of

rotation with regards to the turret head.

0DQXDOO\

&1&

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 129 130

Sin comentarios

Siemens SINUMERIK 802D sl Manual de servicio Pagina 18