Siemens Pacemaker UM344-2 Manual de usuario Pagina 14
- Pagina / 183
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
UM344-2 XTC COMMUNICATOR
September 1995
2
-
1
2.0 XTC COMMUNICATOR
The Moore XTC Communicator (MXC) is a HART protocol-based, hand-held instrument capable of
communicating with HART conformant instruments from Moore Products Co. and from other
manufacturers. It provides full access to on-line and off-line configuration data and to monitoring of
process variables. An MXC is shown in Figure 2-1.
When used with HART-conformant field instruments, the MXC can:
• Store up to 100 instrument configurations in its non-volatile memory.
• Download a stored configuration from the MXC to an on-line instrument (e.g., a transmitter).
• Upload a configuration from an on-line instrument to the MXC
• Store configurations created at and downloaded from a personal computer running Moore XTC
Configuration Software.
• Communicate with a field instrument from any point in the loop.*
The MXC and the field instruments with which it communicates use the HART protocol for remote
communications. HART uses Frequency Shift Keying (Bell 202 standard) to superimpose digital signaling
on the standard 4-20 mA analog signal. Since there is no net energy change, the analog signal will not be
disturbed and loop integrity is maintained.
An MXC can be used on-line and off-line. On-line, it can display process data from a field instrument or
transfer a configuration between the MXC and a field instrument. Off-line, it is used to create a
configuration or to edit a configuration stored in the MXC. Off-line, an MXC can communicate with a
personal computer to transfer configurations between the MXC and personal computer.
In the following sections, MXC hardware and software will be described. Included in this description will
be the display, keypad, wiring, and power requirements. In addition, at the end of this section, major MXC
menu screens are shown in Figure 2-2 and Model 344 parameters accessible through the MXC are
shown.
* Between the sense resistor and instrument in a non-hazardous area installation. Between the sense resistor and a barrier
in a hazardous area installation.
MXC
Personal Computer
Moore XTC
Communicator
Stored
Configurations
(Archives)
Configuration Transfer
Configuration Transfer
X02856S0
Model 344
Temperature Transmitter
- USER’S MANUAL 1
- TABLE OF CONTENTS 2
- CONTENTS UM344-2 3
- September 1995 3
- UM344-2 CONTENTS 4
- September 1995 4
- SECTION AND TITLE PAGE 5
- LIST OF ILLUSTRATIONS 6
- LIST OF TABLES 7
- 1.0 INTRODUCTION 10
- FIGURE 1-1 Basic Model 344 11
- X02869S1 12
- 2.0 XTC COMMUNICATOR 14
- MOORE XTC COMMUNICATOR 15
- SELECT BLOCK TO EDIT 16
- - SENSOR INPUT 16
- PREV NEXT END ECT 16
- SELECT FUNCTION 18
- FIND ARCH TEST 18
- XMTR FUNC MXC END 18
- X02849S1 19
- LOOP OVERRIDE - CHOOSE 21
- CURRENT OUTPUT LEVEL 21
- 4 MA 20 MA OTHR END 21
- X02807S1 25
- SHORT OR LONG FORM 27
- ADDRESS? 27
- SHRT LONG 27
- ADDR ADDR POLL END 27
- MXC SELF TEST 28
- TEST TEST 28
- KEYS SCRN END 28
- WARNING! SELF TEST 30
- MAY BUMP TRANSMITTER 30
- OUTPUT A 30
- 4.0 INSTALLATION 35
- X02866S1 39
- X02867S1 40
- X02868S1 41
- X02817S1 42
- X02821S1 52
- Wall Mounting 53
- X02818S0 57
- FIGURE 4-8 Sensor Assembly 58
- X028AAS0 60
- X02870S1 61
- X02824S1 63
- TESTSIGNAL 66
- X02825S1 67
- MV LO : 0.0000 74
- ENTER MV LO: 74
- (F4) to change the setpoint 78
- DOWNLOADING 84
- CONFIGURATION 84
- - PLEASE WAIT 84
- DOWNLOAD 84
- COMPLETE 84
- MANUAL control mode to 92
- MANUAL control mode 92
- DG MR END CONT 96
- WARNING : ARCHIVE 97
- CONTAINS NO DATA 97
- A 97
- ERROR! ARCHIVE TYPE 98
- DOESN'T MATCH THE 98
- TRANSMITTER TYPE 98
- X02808S1 106
- X02827S1 1 of 2 111
- X02827S1 2 of 2 112
- APPLY 103.00 mV TO 115
- WITH COPPER WIRE 115
- CAL TEST END 118
- CALIBRATE / TEST 118
- TRANSMITTER PASSED 121
- TRANSMITTER SELFTEST 121
- 7.0 CIRCUIT DESCRIPTION 134
- Output Circuitry 135
- Input Circuitry 135
- X02815S0 142
- Z FS 146
- 9.0 GLOSSARY 154
- 4 - 20 mA 160
- Failsafe Level 160
- Absolute Alarm #1 161
- Absolute Alarm #2 161
- R = 162
- X02879S0 163
- Block Diagram, PD Controller 164
- Block Diagram, ID Controller 165
- X02881S1 168
- WARRANTY 177
- WARRANTY UM344-2 178
- W-2 October 1996 178
- PARTS LIST 179
- USER’S MANUAL ADDENDUM 181
- X03013S1 182
Relacionado con productos y manuales para De medición, control y control Siemens Pacemaker UM344-2
(22 paginas)
(22 paginas)
De medición, control y control Siemens BTC-BR Manual
(264 paginas)
(264 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales