Siemens EF 83H Series Manual de usuario descargar pdf (Pagina 32)

Installing the Module

2-6

SIMATIC 505 PROFIBUS-FMS CP User Manual

2.4 Connecting a Programming Device to the FMS CP Module

The

RS-232 port is the interface between your programming device, such as

a personal computer (PC), and the FMS CP module. Using your PC and the

RS-232 port, you can configure the module.

o connect your PC to the FMS CP module, use a standard 9-pin RS-232

cable that conforms to the pinouts shown in Figure 2-5. A standard 505

programming cable that conforms to the serial cable requirements and

pinouts is available through Siemens; specify PPX:2601094–8001.

NOTE:

ou can also use the RS-232 port on the FMS CP module to configure

the programmable logic controller through the backplane using applications

such as TISOFT. This feature is particularly useful if access to the RS-232

port on the CPU is limited.

Shield

Computer

side

Module side

ransmit data

Receive data

Signal ground

ransmit data

Receive data

Signal ground

D-shell

Figure 2-5 RS-232

Port Cable Pinouts

Connect one end of the RS-232 cable to the appropriate 9-pin RS-232/423

serial port on your PC and the other end to the 9-pin RS-232 port on the

FMS CP module, as shown in Figure 2-6. If your computer does not have a

9-pin port, use a 25-to-9-pin converter

RS232

Personal

computer

with

COM5434

Configurator

software

FMS

CP Module

RS-232 Port

Programming Cable

(PPX:2601094–8001)

9-pin

Female

Connector

Figure 2-6 Connecting

our Computer to the FMS CP Module

Connecting to the

RS-232 Port

Connecting the

Serial Cable

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 186 187

Comentarios a estos manuales

Sin comentarios

Siemens EF 83H Series Manual de usuario Pagina 32

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Siemens EF 83H Series