Siemens KDN Series Instrucciones de operaciones descargar pdf (Pagina 59)

KINCO

Input bit (read only) 1X1-65535 ------ DDDDD

Input Register (read only) ------ 3X1-65535 DDDDD

Output Register ------ 4X1-65535 DDDDD

Note：

Mapping of address (same as *10 relationships):

2-01 is to 4X2010

3-02 is to 4X3020

So address 4X1300 is to 1-30 as following picture, here is double word address. To get more

information, please refer to danfoss manual.

In addition, to get mapping address of startup, you should set bit of 3, 4, 5, 6,7,11 coil on:

0x047C=0000 0100 0111 1100

Set 0X 3, 0X 4, 0X 5, 0X 6, 0X 7, 0X 11 all to “1” (if random one of these registers is “0”,

Frequency Converter will stop.

loop 0 1

01 Preset reference value LSB

02 Preset reference value MSB

03 DC brake Do not DC brake

04 Inertial stop Do not Inertial stop

05 Quickly stop Do not Quickly stop

06 locking frequency Do not locking frequency

07 Acc/Dec stop start

08 Do not reset reset

09 Do not inching inching

10 Acc/Dec 1 Acc/Dec 2

11 valid data invalid data

12 Relay 1 close Relay 1 open

13 Relay 2 close Relay 2 open

14 Set LSB

15 Set MSB

16 Do not reverse reverse

Transducer controller word (FC structure)

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 257 258

Sin comentarios

Siemens KDN Series Instrucciones de operaciones Pagina 59