Siemens KDN Series Instrucciones de operaciones descargar pdf (Pagina 235)

KINCO

235

Trio controller communication settings

Omron protocol:

define Host Link slave node

HLS_NODE=1

define Host Link slave mode code

HLS_MODEL=$FA

Set up Host Link slave for port 2

Trio controller setting：SETCOM (baudrate, databits, stopbits, parity, port, 5)

SETCOM（9600，7，2，2，2，5）

MC controller unit can communicate with plc terminal after setting the configuration.

Note：A is the programming port of controller，B is the communication port.

Modbus Protocol：

address=1

Setcom (9600, 8, 1, 0, 1, 4)

Supported Device

TRIO

Device Bit Address Word Address Format Notes

I/O and Internal Auxiliary Relay IR0.0-1023.15 ———— DDDD.DD

Data Memory ———— DM0-30000 DDDDD

Note：

Address correspondence: IRn.m-->the m Trio VR (n); DMn->Table (n). Example IR1.02

corresponds to the 2nd bit of VR1.

Modbus RTU Extend

Device Bit Address Word Address Format Notes

Data register bit 4X_bit 0.0-1023.15 ———— DDDD.DD

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 257 258

Sin comentarios

Siemens KDN Series Instrucciones de operaciones Pagina 235